Prototype of Car Washing Automation and Monitoring System Using Outseal PLC and Modbus HMI

Gusti Randa Affinda Putra; Ezwarsyah Ezwarsyah; Raihan Putri; Badriana Badriana; Rosdiana Rosdiana

doi:10.47709/brilliance.v5i2.6465

Penulis

Gusti Randa Affinda Putra Universitas Malikussaleh, Indonesia
Ezwarsyah Ezwarsyah Universitas Malikussaleh, Indonesia
Raihan Putri Universitas Malikussaleh, Indonesia
Badriana Badriana Universitas Malikussaleh, Indonesia
Rosdiana Rosdiana Universitas Malikussaleh, Indonesia

DOI:

https://doi.org/10.47709/brilliance.v5i2.6465

Kata Kunci:

Automation, Car Washing, Modbus HMI, Monitoring, Outseal PLC

Abstrak

Automation technology has significantly improved the efficiency of various sectors, including car washing services, which traditionally require intensive time and labor.This research aims to design and develop a prototype of an automatic car washing system using Outseal PLC and Modbus HMI to enhance the effectiveness and quality of car washing processes.The prototype integrates infrared proximity sensors, DC gearbox motors, DC pumps, DC fans, and a conveyor system controlled by a ladder diagram programmed through Outseal Studio. Wireless monitoring and control are enabled using the DT-06 WiFi module with Modbus TCP/IP protocol. Performance testing was conducted to evaluate system responsiveness, sensor accuracy, and the stability of wireless communication between the PLC and HMI.The system successfully automated all stages of the car washing process, including soap spraying, brushing, rinsing with clean water, and drying, achieving response times ranging from 0.14 to 0.3 seconds. Wireless communication remained stable up to a distance of 16 meters, and the infrared proximity sensors demonstrated high detection accuracy with an error margin of only 2–3.2%.The developed prototype effectively automates the car washing process with accurate detection and responsive control, operating reliably under testing conditions. This system is suitable for small-scale car washing operations and educational laboratory applications, with potential scalability for broader industrial implementation with additional development in advanced brush mechanisms and cloud-based monitoring integration.

Referensi

Anaam K I, H. T., & Pranata R Y, Abdillah h, P. A. Y. W. (2022). Pengaruh Trend Otomasi Dalam Dunia Manufaktur dan Industri. Vocational Education National Seminar, 1(1), 46–50.

Feryando, D. A., Prasetyo, A., Wibowo, E., & Dafa Farhandicha, A. (2023). Design and Development of Digital Gentanik System Based on PLC Outseal, 275–284. doi:10.2991/978-94-6463-126-5_29

Firdaus, A. A., & Hariyono, J. (2022). Simulasi Filling machine dengan PLC (Programmable Logic Controller) pada Pabrik Daur Ulang Sampah Plastik menjadi Keramik. ResearchGate, (December).

Imron, M. (2018). Rancang Bangun Sistem Pencucian Kendaraan berbasis PLC Zelio Type SR2B121JD. Jurnal Teknik, 7(1). doi:10.31000/JT.V7I1.953

Irawan, M. Y. (2021). Perancangan Kendali Motor Listrik Berbasis Smart Relay (Zelio). Jurnal Teknik Elektro Dan Komputer TRIAC, 8(2), 44–46. doi:10.21107/TRIAC.V8I2.10510

Oktaviani, T., Ali, S., & Taher, R. (2019). Perancangan Prototype Cuci Mobil Otomatis Berbasis PLC Dan SCADA. Jurnal Litek?: Jurnal Listrik Telekomunikasi Elektronika, 16(2), 42. doi:10.30811/LITEK.V16I2.1206

Purnomo, R., Suwarno, D. U., Studi, P., Elektro, T., Sanata, U., Yogyakarta, D., & Sleman, K. (2021). Pengendalian Sistem Parkir Mobil Putar Vertikal Otomatis Menggunakan PLC Outseal dan HMI Android. Prosiding Seminar Nasional Teknik Elektro UIN Sunan Gunung Djati Bandung, (November 2021), 182–190. Retrieved from https://senter.ee.uinsgd.ac.id/repositori/index.php/prosiding/article/view/senter2021p17

Robiyahya, A., Arnandi, W., & Noorsetyo, A. (2019). Rancang Bangun Prototipe Cuci Mobil Otomatis Berbasis Sensor LDR. Riset Diploma Teknik Mesin, 2.

Rozaq, I. A., & Rohman, M. N. (2019). Analisa Penggunaan Sensor Proximity LJC 18 A3-B-Z/Bx Sebagai Salah Satu Sensor Prototype Cucimobil Otomatis. Indonesian Journal of Technology, Informatics and Science (IJTIS), 1(1), 13–16. doi:10.24176/IJTIS.V1I1.4597

Saputra, D., Ma’arif, A., Maghfiroh, H., Chotikunnan, P., & Rahmadhia, S. N. (2023). Design and Application of PLC-based Speed Control for DC Motor Using PID with Identification System and MATLAB Tuner. International Journal of Robotics and Control Systems, 3(2), 233–244. doi:10.31763/IJRCS.V3I2.775

Sartono, K., Djamin, M., & Suryadi, S. (2024). Design and Construction of Automatic Railway Crossing Gate Control Using Proximity and Infrared Sensors Based on Omron CP1E E30-SDRA PLC. West Science Interdisciplinary Studies, 2(09), 1732–1739. doi:10.58812/WSIS.V2I09.1271

Setyawan dan Endang Sri Rahayu, O., Raya Bogor Km, J., & Timur, J. (2020). Perangkat Monitoring dan Kontrol Fasilitas Utility mengggunakan Outseal PLC & Smartphone. Jurnal Teknologi, 8(1), 46–56. doi:10.31479/JTEK.V1I8.58

Susanto, A., & Kurniawan, I. (2021). Prototype Dan Desain Alat Mesin Conveyor Penghitung Barang Berbasis PLC Dan Aplikasi HMI Android. Jurnal Teknik Elektro, 5(2). doi:10.31000/JTE.V5I2.7002

Suwarno, D. U. (2020). Modbus HMI bluetooth for outseal PLC. AIP Conference Proceedings, 2217(December). doi:10.1063/5.0000583

Utami, M. D., Zahra, A. A., & Sudjadi, S. (2020). Perancangan Dan Analisa Kinerja Sistem Akuisisi Data Sensor Tcs34725 Dan Pengendalian Pompa Motor Dc Pada Alat Pencampur Warna. Transient: Jurnal Ilmiah Teknik Elektro, 9(3), 360–367. doi:10.14710/transient.v9i3.360-367

Yanto, F. D., Amin, N., Mahmudi, I., Aristo, M., & Dewi, S. (2022). Rancang Bangun Sistem Smart Lab Menggunakan Outseal PLC dan HMI dengan Media Komunikasi Modbus. Seminar Nasional Teknik Elektro Dan Informatika (SNTEI), 8(1), 56–60.