Rancang Bangun Sistem Pemantauan Getaran Pelat Lantai Gedung Bertingkat Berbasis Internet of Things
Design and Development of an Internet of Things-Based Vibration Monitoring System for Floor Slabs in Multi-Story Buildings
DOI:
https://doi.org/10.47709/jpsk.v6i03.9774Keywords:
Internet Of Things, Getaran Pelat Lantai, Akselerometer MEMS, Lora, Pemantauan StrukturAbstract
Vibration monitoring of floor slabs in high-rise buildings is essential for understanding a structure's dynamic response and evaluating its serviceability performance. Integrating these measurements with Internet of Things (IoT) technology can streamline continuous data collection, transmission, and presentation. This research aims to design an IoT-based floor slab vibration monitoring system that incorporates Micro-Electro-Mechanical Systems (MEMS) accelerometers, an Arduino platform, Long Range (LoRa) wireless communication, data storage, and a monitoring dashboard. The methodology involves system design followed by a quantitative experimental evaluation plan, encompassing vibration acceleration acquisition, signal pre-processing, time- and frequency-domain analysis, and data communication testing. Signal analysis is planned using Fast Fourier Transform (FFT) and Power Spectral Density (PSD), with the potential for Operational Modal Analysis (OMA) should the data quality meet the requirements. Evaluated parameters include dominant frequency, peak acceleration, Root Mean Square (RMS) values, damping ratios (if estimable), and the Packet Delivery Ratio (PDR) and communication latency. The design also compares measurement results with those obtained via a smartphone—used as a reference device—and validates frequencies through a numerical model developed in SAP2000. This phase delivers an architectural design, component allocation, a data-processing workflow, and a set of evaluation parameters. The illustrative graphs and numerical figures presented do not represent actual test results; therefore, they do not yet confirm measurement accuracy, transmission reliability, or model validity. While this system has potential to support digital vibration monitoring, prototype testing and quantitative validation are required before its practical feasibility can be determined.







