ac

Effect of Coiling and Macrobending on Fiber To The Building (FTTB) Network Activation

Penulis

  • Yustini Yustini Politeknik Negeri Padang, Indonesia
  • Nasrul Nasrul Politeknik Negeri Padang, Indonesia
  • Aprinal Adila Asril Politeknik Negeri Padang, Indonesia
  • Bintang Aulia Nugraha Politeknik Negeri Padang, Indonesia

DOI:

10.47709/brilliance.v4i2.4674

Kata Kunci:

Fiber To The Building, Core Patch Cable, Coiling, Macrobending, Attenuation

Dimension Badge Record



Abstrak

Fiber to the Building (FTTB) provides a fast and efficient service. However, the network quality may be affected by high attenuation at the termination (ONU) due to coiling, macrobending, and the length of patch cords, impacting network stability. This study aims to measure and analyze the effect of coiling and macrobending on patch cord cables of different lengths, as well as their influence on attenuation and FTTB network performance. The method includes simulating patch cord cables with lengths of 3m, 5m, and 10m. The tested treatments include conditions without coil, with coil, macrobending without coil, and macrobending with coil applied to the final termination before and after activating the FTTB network. Before activation, the lowest attenuation was 19.78 dB in the 3m cable without coil and macrobending, while the highest attenuation was 21.93 dB in the 10m cable with 5 coils (6cm curvature) and macrobending (0.8cm diameter). After activation, the lowest attenuation was 19.74 dB in the 3m cable without coil and macrobending, while the highest attenuation was 23.92 dB in the 10m cable with 5 coils (6cm curvature) and macrobending (0.8cm diameter). The test results show that the attenuation is affected by the number of coils, macrobending, and cable length.Damping increases with an increase in coils, cable length, and macrobending.

Google Scholar Cite Analysis
Abstrak viewed = 37 times

Referensi

Anggita, T., Budi Rahman, L., Akbar, A., Asnoer Laagu, M., & Apriono, C. (2020). Design and Performance Analysis of Fiber to the Building (FTTB) to Support Smart Building in Urban Areas. ELKHA, 12(1), 32–40.

Asril, A. A., Maria, P., Antonisfia, Y., & Hadi, R. (2023). Fiber to The Home (FTTH) Network Design with Addition of Optical Distribution Point (ODP) Using the Branching Method. International Journal of Advanced Science Computing and Engineering, 5(2), 95–107.

Asril, A. A., Septima, U., Dewi, R., Maria, P., & Herda, D. L. (2023). Fiber Optical Network Damage Detection Passive Splitter 1:8 in ODC uses IOT Technology as a means of Real Time Reporting. Brilliance: Research of Artificial Intelligence, 3(2), 122–133. https://doi.org/10.47709/brilliance.v3i2.2966

Asril, A. A., & Yustini. (2023). Installation and Activation of a Fiber To The Home (FTTH) Network With The Addition of Optical Distribution Point (ODP) Using The Branching Method. International Journal of Advanced Science Computing and Engineering, 5(3), 298–304.

Asril, A. A., Yustini, Maria, P., & Herwita, P. A. (2019). Designing a Pigtail type Single Mode Optical Cable Transmission Attenuation Measurement System. Elektron Jurnal Ilmiah, 11(2), 56–62.

Costa, J. W., Franco, M. A. R., Serrão, V. A., Cordeiro, C. M. B., & Giraldi, M. T. R. (2019). Macrobending SMS fiber-optic anemometer and flow sensor. Optical Fiber Technology, 52. https://doi.org/10.1016/j.yofte.2019.101981

Eliche, P., Orike, S., & Okotcha, R. N. (2022). Reduction of Optical Fiber Loss and Signal Scattering Using Marcuse’s Method. Journal of Information Technology and Sciences, 22–32. Retrieved from www.matjournals.com

Fajrina, A. N., Nopiani Damayanti, T., & Maulana, R. (2023). Designing Fiber To The Building (FTTB) Network Based on GPON (Gigabit Passive Optical Network) at Taman Melati Apartment in Rancaekek. E-Proceeding of Applied Science, 9(1), 176–186.

Jing, N., Zhou, J., Li, K., Wang, Z., Zheng, J., & Xue, P. (2019). Refractive Index Sensing Based on a Side-Polished Macrobend Plastic Optical Fiber Combining Surface Plasmon Resonance and Macrobending Loss. IEEE Sensors Journal, 19(14), 5665–5669. https://doi.org/10.1109/JSEN.2019.2908418

Maria, P., Asril, A. A., Wiharti, W., & Prayama, D. (2022). Fiber to The Home (FTTH) Network Design in Analyzing Macro Bending Problems in The Home Cable Installation Segment. International Journal of Advanced Science Computing and Engineering, 4(2), 138–154.

Parenreng, A. M., Dewiani, & Achmad, A. (2020). Core Management Methods and Power Link Budget Analysis for New Optical Fiber Expansion. 2020 IEEE International Conference on Communication, Networks and Satellite, Comnetsat 2020 - Proceedings, 159–164. https://doi.org/10.1109/Comnetsat50391.2020.9328983

Pratomo, H., Sulistyo, S., Hanto, D., Syahadi, M., Bayuwati, D., Mulyanto, I., … Setiono, A. (2023). Macrobending loss in fiber optic wrapped on rubber-spring wire structure under static load-pressure. Journal of Physics: Conference Series, 2596(1). https://doi.org/10.1088/1742-6596/2596/1/012023

Roman, M., Zhu, C., O’Malley, R. J., Gerald, R. E., & Huang, J. (2021). Distributed Fiber-Optic Sensing with Low Bending Loss Based on Thin-Core Fiber. IEEE Sensors Journal, 21(6), 7672–7680. https://doi.org/10.1109/JSEN.2021.3050702

Sakuma, H., Hayashi, T., Nagashima, T., Nakanishi Tetsuya, Soma, D., Tsuritani, T., & Hasegawa, T. (2019). MICROBENDING BEHAVIOR OF RANDOMLY-COUPLED ULTRA-LOW-LOSS MULTI-CORE FIBER. 45th European Conference on Optical Communication (ECOC 2019). https://doi.org/10.1109/JLT.2017.2662082

Teng, C., Zheng, J., Liang, Q., Deng, S., Deng, H., Liu, H., & Yuan, L. (2020). The Influence of Structural Parameters on the Surface Plasmon Resonance Sensor Based on a Side-Polished Macrobending Plastic Optical Fiber. IEEE Sensors Journal, 20(8), 4245–4250. https://doi.org/10.1109/JSEN.2020.2963853

Yustini, Asril, A. A., Setiawan, H., Maria, P., & Rifka, S. (2023). Installation and Activation of Fiber To The Home (FTTH) Networks and Macrobending Problems in the Feeder Cable Segment. Brilliance: Research of Artificial Intelligence, 3(2), 134–143. https://doi.org/10.47709/brilliance.v3i2.2967

##submission.downloads##

ARTICLE Diterbitkan HISTORY

Submitted Date: 2024-09-17
Accepted Date: 2024-09-18
Published Date: 2024-10-07

Cara Mengutip

Yustini, Y., Nasrul, N., Asril, A. A., & Nugraha, B. A. (2024). Effect of Coiling and Macrobending on Fiber To The Building (FTTB) Network Activation. Brilliance: Research of Artificial Intelligence, 4(2), 509-516. https://doi.org/10.47709/brilliance.v4i2.4674

Artikel paling banyak dibaca berdasarkan penulis yang sama