Installation and Activation of Fiber To The Home (FTTH) Networks and Macrobending Problems in the Feeder Cable Segment
DOI:
10.47709/brilliance.v3i2.2967Keywords:
ACTIVATION, FEEDER CABLE, MACROBENDING, DAMPINGDimension Badge Record
Abstract
Macrobending is a form of disturbance in Fiber To The Home (FTTH) networks that occurs due to macro-level bending of the cable caused by damage to the fiber optic. Macrobending frequently occurs in FTTH networks within the feeder cables. Feeder cables serve as connectors between the Optical Line Terminal (OLT) and Optical Distribution Cabinet (ODC) in the FTTH system. The occurrence of macrobending in feeder cables affects the quality of the FTTH network. In this study, the impact of macrobending is analyzed based on curvature diameters of 50 cm, 25 cm, and 5 cm on feeder cables before and after FTTH network activation. Before FTTH network activation, the High Super Luminescent Diode (HSL) is used as the input power source, whereas after activation, the input power source comes from the OLT using Small Form-factor Pluggable (SFP) modules. The attenuation (loss) before activation due to macrobending, with curvature diameters of 50 cm, 25 cm, and 5 cm, is found to be 0.02 dB, 0.05 dB, and 0.26 dB, respectively. After activation, the attenuation with the same curvature diameters is measured as 0.01 dB, 0.02 dB, and 0.20 dB, respectively. It is observed that as the curvature diameter decreases, the attenuation increases. The comparison of attenuation before and after network activation doesn't show a significant difference because the input power doesn't affect macrobending, rather it is influenced by the curvature diameter.
Abstract viewed = 149 times
References
. K. Mardhatillah, A. A. Asril, Yustini and Yulindon, "Analysis of Drop Core Cable Connection Losses on Optical Network Performance in Building G, 3rd Floor, Padang State Polytechnic," Electrode Focus Journal, vol. 7(3), pp. 172 -177, 2022.
. R. Hafizt, Yustini, A. A. Asril, H. N. Nawi and A. Warman, "Implementation and Performance of Fiber Networks to the Home with GPON Technology," Journal of Electrical Technology, vol. 18(2), pp. 53-58, 2021.
. W. Wiharti, P. Maria, A. A. Asril, Yustini and D. Prayama, "Fiber to The Home (FTTH) Network Design in Analyzing Macro Bending Problems in The Home Cable Installation Segment," International Journal of Advanced Science Computing and Engineering, vol. 4(2), pp. 138-154, 2022.
. D. R. Febriawan, “Practical Work Report PT. Telkom AKses Yogyakarta," Faculty of Industrial Technology, Atma Jaya University Yogyakarta, 2019.
. C. Pratiwi, G. Sugandi and Junaidi, "Creation and Characterization of an Ammonia Sensor Based on Bending Fiber Optic," Journal of Physics Theory and Applications, vol. 6(2), pp. 175-180, 2018.
. S. A. H. Andhina, Waluyo and H. Darmono, ""ANALYSIS OF MACROBENDING LOSS IN SINGLEMODE-MULTIMODE-SINGLEMODE OPTICAL FIBER CORE"," JARTEL Journal, vol. 9(2), pp. 11-16, 2019.
. R. R. Wijayanti, W. K. Budiargo and Abdurrasyid, "DESIGN AND BUILDING OF THE BORESCOPE INSPECTION REPORT INFORMATION SYSTEM ON ENGINE MAINTENANCE PT GMF AEROASIA, TBK," IF (Jurnal of Informatics), pp. 74-81, 2020.
. S. Khairunnisa, H. Octavia, V. Veronica and A. A. Asril, "Design of a Transmission Attenuation Measurement System in Single Mode and Multi Mode Optical Cables Due to Bending with a Radius Factor Using OPM and OTDR Measuring Instruments," Journal Poly Engineering Sciences, vol. 15(1), pp. 27-38, 2019.
. A. Sulistyani, K. Sujatmoko, and H. H. Ryanu, "Fiber Optic Network Fault Detector at Odc Reporting Real Time Fiber Optic Detector At Odc By Utilizing IoT Technology As a Means of Real Time Reporting," vol. 8, no. 5, p. 5197–5210, 2021.
. I. P. F. Prasetya, G. Sukadarmika, and I. D. D. H, "Identification and Monitoring Using Field Support Management Applications and Xshell 7," vol. 9, no. 2, p. 167–172, 2022.
. Febry Yuni Mulato, "Optical Fiber," National, p. 1–6, 2020
. K. Pustaka and D. A. N. Basis, "Chapter 2 literature review and theoretical basis 2.1," pp.7–36, 2005.
. A. Wicaksana and T. Rachman, "No Title No Title No Title," Angew. Chemie Int. Ed. 6(11), 951–952., vol. 3, no. 1, p. 10–27, 2018, [Online]. Available at: https://medium.com/@arifwicaksanaa/pengertian-use-case-a7e576e1b6bf.
. Z. N. Mukhlisin, A. E. Jayati, R. K. Pramuyanti, and ..., "Fiber Optic Attenuation Analysis in the Installation of Pertamina Gas Station Digitalization by PT. Telkom Witel Semarang with Power Link Budget," J. Tek. Electro..., p. 1–74, 2021, [Online]. Available at: https://escri.usm.ac.id/detail-C41A-549.html.
. R. R. Syahputra, M. Bagaswara, and D. B. Santoso, "Average Attenuation (Loss) Analysis in the Ftth Network in Btr Block O Bekasi," Power Elektron. J. Electro People, vol. 10, no. 2, p 80, 2021, doi:10.30591/polektro.v10i2.2586.
. Y. Efendi, "Internet of Things (IoT) Light Control System Using Mobile Based Raspberry Pi," J. Ilm. Comput Sci., vol. 4, no. 2, pp. 21–27, 2018, doi: 10.35329/jiik.v4i2.41.
. A. Deris, "Emergency Information System in Mini Markets Using Esp8266 Microcontroller Based on Internet of Things," Computing J. Ilm. Computer Science. and Matt., vol. 16, no. 2, p. 283–288, 2019, doi:10.33751/computing.v16i2.1622.
. Sriwijaya State Polytechnic, "LDR (Light Dependent Resistor) Sensor," p.–30, 2017.
. Ketty Siti Salamah, Trie Maya Kadarina, and Zendi Ilmua, "Introduction to Mit Inventor for Students in the North Development Region," J. Abdi Masy., pp. 5–9, 2020.
. E. A. W. Sanad, "Utilization of Realtime Database on the Firebase Platform in the Nabire Regency E-Tourism Application," J. Perelit. Enj., vol. 22, no. 1, pp. 20–26, 2019, doi: 10.25042/jpe.052018.04.
Downloads
ARTICLE Published HISTORY
How to Cite
Issue
Section
License
Copyright (c) 2023 Yustini, Aprinal Adila Asril, Herry Setiawan, Popy Maria, Silfia Rifka
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.