Application of Artificial Intelligence in Mechanical Engineering
DOI:
10.47709/brilliance.v2i3.1719Keywords:
Artificial Intelligence, Mechanical Engineering, ANNsDimension Badge Record
Abstract
The use of artificial intelligence (AI) is becoming more prevalent across many industries. Examples include intelligently based control, intelligently based mechanical systems, pattern recognition-based systems, and knowledge processing. Method/Statistical Analysis: In this paper, an extensive review was conducted on the applications of ANN in intelligent mechanical engineering systems, including fault diagnosis in machines, mechanical structure analysis, and geometry modelling of mechanical structures, mechanical design, and its optimization. Findings: The adaptation of artificial neural networks (ANN), particularly in the field of mechanical engineering, is still in its early stages of development. This paper highlights the different ways artificial neural networks (ANNs) are used in intelligent-based systems, as well as the potential for reducing costs and time and obtaining more efficient systems for mechanical-based design and defect detection. Application/Improvements: This work will be improved in the future by adding more AI applications to the design of mechanically based systems.
Abstract viewed = 628 times
References
Al-Bahrani, M., & Cree, A. (2021). In situ detection of oil leakage by new self-sensing nanocomposite sensor containing MWCNTs. Applied Nanoscience, 11(9), 2433-2445.
Quintana, G., Garcia-Romeu, M. L., & Ciurana, J. (2011). Surface roughness monitoring application based on artificial neural networks for ball-end milling operations. Journal of Intelligent Manufacturing, 22(4), 607-617.
Al-Abboodi, H., Fan, H., Mhmood, I. A., & Al-Bahrani, M. (2022). The dry sliding wear rate of a Fe-based amorphous coating prepared on mild steel by HVOF thermal spraying. Journal of Materials Research and Technology, 18, 1682-1691.
Meesad, P., & Yen, G. G. (2000). Pattern classification by a neurofuzzy network: application to vibration monitoring. ISA transactions, 39(3), 293-308.
Al-Bahrani, M. (2019). The Manufacture and Testing of Self-Sensing CNTs Nanocomposites for Damage Detecting Applications (Doctoral dissertation, University of Plymouth).
Tanaka, M., Sakawa, M., Shiromaru, I., & Matsumoto, T. (1995, October). Application of Kohonen's self-organizing network to the diagnosis system for rotating machinery. In 1995 IEEE International Conference on Systems, Man and Cybernetics. Intelligent Systems for the 21st Century (Vol. 5, pp. 4039-4044). IEEE.
Al?Bahrani, M., Majdi, H. S., Abed, A. M., & Cree, A. (2022). An innovated method to monitor the health condition of the thermoelectric cooling system using nanocomposite?based CNTs. International Journal of Energy Research, 46(6), 7519-7528.
Sivanandam, S. N., & Deepa, S. N. (2006). Introduction to neural networks using Matlab 6.0. Tata McGraw-Hill Education.
Balamurugan, R. J., AL-bonsrulah, H. A., Raja, V., Kumar, L., Kannan, S. D., Madasamy, S. K., ... & Al-Bahrani, M. (2022). Design and Multiperspectivity based performance investigations of H-Darrieus vertical Axis wind turbine through computational fluid dynamics adopted with moving reference frame approaches. International Journal of Low-Carbon Technologies.
Khayyat, H. A. (2018). ANN based Intelligent Mechanical Engineering Design: A Review. Indian J. Sci. Technol, 11(27), 1-7..
Al-Bahrani, M., Gombos, Z. J., & Cree, A. (2018). The mechanical properties of functionalised MWCNT infused epoxy resin: A theoretical and experimental study. Int. J. Mech. Mechatronics Eng, 18, 76-86.
Burczy?ski, T., & Szczepanik, M. (2013). Intelligent optimal design of spatial structures. Computers & Structures, 127, 102-115.
Madasamy, S. K., Raja, V., AL-bonsrulah, H. A., & Al-Bahrani, M. (2022). Design, development, and multi-disciplinary investigations of aerodynamic, structural, energy, and exergy factors on 1 kW horizontal Axis wind turbine. International Journal of Low-Carbon Technologies.
Landay, J. A., & Myers, B. A. (2001). Sketching interfaces: Toward more human interface design. Computer, 34(3), 56-64.
Wu, X., Fan, H., Wang, W., Zhang, M., Al-Bahrani, M., & Ma, L. (2022). Photochemical synthesis of bimetallic CuNiS x quantum dots onto gC 3 N 4 as a cocatalyst for high hydrogen evolution. New Journal of Chemistry, 46(31), 15095-15101.
Obaid, A. J., & Sharma, S. (2020). Recent trends and development of heuristic artificial intelligence approach in mechanical system and engineering product design. Saudi Journal of Engineering and Technology, 5(2), 86-93.
Al-Bahrani, M., Bouaissi, A., & Cree, A. (2022). The fabrication and testing of a self-sensing MWCNT nanocomposite sensor for oil leak detection. International Journal of Low-Carbon Technologies, 17, 622-629.
Baillie, D., & Mathew, J. (1994). Diagnosing rolling element bearing faults with artificial neural networks. Acoustics Australia, 22, 79-79.
Abbas, E. F., Al-abady, A., Raja, V., AL-bonsrulah, H. A., & Al-Bahrani, M. (2022). Effect of air gap depth on Trombe wall system using computational fluid dynamics. International Journal of Low-Carbon Technologies, 17, 941-949.
Wu, X., Fan, H., Wang, W., Zhang, M., Al-Bahrani, M., & Ma, L. (2022). Photochemical synthesis of bimetallic CuNiS x quantum dots onto gC 3 N 4 as a cocatalyst for high hydrogen evolution. New Journal of Chemistry, 46(31), 15095-15101.
Al-Abboodi, H., Fan, H., Mahmood, I. A., & Al-Bahrani, M. (2021). Experimental Investigation and Numerical Simulation for Corrosion Rate of Amorphous/Nano-Crystalline Coating Influenced by Temperatures. Nanomaterials, 11(12), 3298.
Al-Bahrani, M., Alhakeem, M. R. H., & Cree, A. (2020). Damage sensing and mechanical properties of a laminate composite material containing MWCNTs during low-velocity impact. Journal of Petroleum Research and Studies, 10(4), 147-164.
Al-Bahrani, M., & Cree, A. (2018). Predicting the mechanical behavior of epoxy resin based carbon nanotubes.
Wu, X., Fan, H., Wang, W., Zhang, M., Al-Bahrani, M., & Ma, L. (2022). Photochemical synthesis of bimetallic CuNiS x quantum dots onto gC 3 N 4 as a cocatalyst for high hydrogen evolution. New Journal of Chemistry, 46(31), 15095-15101.
Downloads
ARTICLE Published HISTORY
Accepted Date: 2022-09-12
Published Date: 2022-09-13
How to Cite
Issue
Section
License
Copyright (c) 2022 Mohammed Ridha H Alhakeem , Dirja Nur Ilham
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
info@itscience.org, web: 
