ac

An Overview of the most Common Vehicle Suspension Problems

Authors

  • Ahmed Aboazoum * Institute of Aerospace & Automotive Engineering, Rabat, Morocco

DOI:

10.47709/brilliance.v2i3.1655

Keywords:

Suspension system, Vehicle system, Suspension problems, System repair, Suspension control

Dimension Badge Record



Abstract

The design of the suspension system, which transmits force between the vehicle and the ground, is principally responsible for the driving comfort of a vehicle. Importantly, a vehicle's suspension system contributes to the reliability and precision of steering and control, as well as to the friction between the vehicle and the road. The suspension system is also responsible for absorbing and dampening road stress, so that we do not feel every bump on the road when driving. Linkages, springs, and shock absorbers are the three fundamental types of suspension components. This paper introduced the most common suspension problems and the symptoms that may indicate you need a suspension system repair, where it turns out that there is a set of problems common to all vehicle suspension systems, such as poor wheel alignment, faulty shocks or struts, damaged springs, failing ball joints, and faulty control arms. Now as a conclusion of this paper, the reader can know the most common suspension system problems in vehicles and thus how to deal with these problems.

Google Scholar Cite Analysis
Abstract viewed = 547 times

References

Mulla, A. A., Unaune, D. R., Active suspensions future trend of automotive suspensions, International Conference on Emerging Trends in Technology&Its Appliocations, ICETTA, 2013.

Cao D, Song X, Ahmadian M. Editors’ perspectives: road vehicle suspension design, dynamics, and control. Vehicle System Dynamics 2011;49:3–28.

Ghazaly NM, Moaaz AO. The future development and analysis of vehicle active suspension system. IOSR Journal of Mechanical and Civil Engineering 2014;11:19–25.

Goodarzi A, Khajepour A. Vehicle suspension system technology and design. Synthesis Lectures on Advances in Automotive Technology 2017;1:i–77.

Dishant E, Singh P, Sharma M. Suspension systems: A review. International Research Journal of Engineering and Technology 2017;4:148–160.

A. A. Ahmed, A. Sami, A. Alsharif, A. S. D. Alarga, J. Santhosh and A. Albagul, "Evaluation of Electric Vehicle Stability Using Fractional PID and Fuzzy PID Based Controllers," 2022 IEEE 2nd International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA), 2022, pp. 116-120, doi: 10.1109/MI-STA54861.2022.9837532.

A. Ali Ahmed and M. Emheisen, "Analysis of Vehicle Handling Using a Simple Track Model of Automobile," 2019 19th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA), 2019, pp. 130-133, doi: 10.1109/STA.2019.8717244.

A. A. Ahmed, A. Alsharif, T. Triwiyanto, M. Khaleel, C. W. Tan and R. Ayop, "Using of Neural Network-Based Controller to Obtain the Effect of Hub Motors Weight on Electric Vehicle Ride Comfort," 2022 IEEE 2nd International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA), 2022, pp. 189-192, doi: 10.1109/MI-STA54861.2022.9837608.

A. A. Ahmed and A. F. Saleh Alshandoli, "Using Of Neural Network Controller And Fuzzy PID Control To Improve Electric Vehicle Stability Based On A14-DOF Model," 2020 International Conference on Electrical Engineering (ICEE), 2020, pp. 1-6, doi: 10.1109/ICEE49691.2020.9249784.

A. A. Ahmed and O. S. M. Jomah, "Vehicle Yaw Rate Control For Lane Change Maneuver Using Fuzzy PID Controller And Neural Network Controller," 2020 IEEE 2nd International Conference on Electronics, Control, Optimization and Computer Science (ICECOCS), 2020, pp. 1-6, doi: 10.1109/ICECOCS50124.2020.9314541.

A. Alsharif, C. W. Tan, R. Ayop, A. Ali Ahmed, M. Mohamed Khaleel and A. K. Abobaker, "Power Management and Sizing Optimization for Hybrid Grid-Dependent System Considering Photovoltaic Wind Battery Electric Vehicle," 2022 IEEE 2nd International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA), 2022, pp. 645-649, doi: 10.1109/MI-STA54861.2022.9837749.

Mohamed Belrzaeg, Abdussalam Ali Ahmed, Amhimmid Q Almabrouk, Mohamed Mohamed Khaleel, Alforjani Ali Ahmed and Meshaal Almukhtar, "Vehicle dynamics and tire models: An overview," World Journal of Advanced Research and Reviews, 2021, 12(01), 331–348

Abdussalam Ali Ahmed, Quarter car model optimization of active suspension system using fuzzy PID and linear quadratic regulator controllers, Global Journal of Engineering and Technology Advances, 2021, 06(03), 088-097, DOI url: https://doi.org/10.30574/gjeta.2021.6.3.0041.

Abdussalam Ali Ahmed, Faraj Ahmed Elzarook Barood and Munir S. Khalifa, Vehicle yaw rate simulation and control based on single-track model, World Journal of Advanced Research and Reviews, 2021, 10(01), 019–029, Article DOI:10.30574/wjarr.2021.10.1.0127.

Abebe, B. A., Santhosh, J., Ahmed, A. A., Murugan, P. and Ashok, N. (2020). Non-Linear Mathematical Modelling for Quarter Car Suspension Model. International Journal on Emerging Technologies, 11(5):536–544.

Abdussalam Ali Ahmed, Rafat S. A, Abumandil, Full Vehicle Suspension System with In-Wheel Electric Motors, European Academic Research, Vol. VII, Issue 1/ April 2019.

Almabrok Rahel Almaktar Shakaf, Adel Ramadan Hussien Mohamed, Abdussalam Ali Ahmed, “Effect of Aerodynamic Drag Force Parameters on Electric Vehicle Motion Performance”, World Wide Journal of Multidisciplinary Research and Development, Volume 4, Issue 1 (2018) pp. 197-201.

Abubaker Abasalam A. Emheisen, Abdussalam Ali Ahmed, Nasr Ismael Alhusein, Abdurahim Alfadel Sakeb, Abdulhamid.S. Abdulhamid,“ Car Wheel slip Modelling, Simulation, And Control Using Quarter Car Model”, International Journal of Engineering Trends and Technology (IJETT), Vol. 28, No. 06, October2015.

Abdussalam Ali Ahmed and Ba?ar Özkan, “Analysis of effect of in-wheel electric motors mass on passive and active suspension systems”, ARPN Journal of Engineering and Applied Sciences, Vol. 10, No. 14, August 2015.

Downloads

ARTICLE Published HISTORY

Submitted Date: 2022-08-02
Accepted Date: 2022-08-02
Published Date: 2022-08-04

How to Cite

Aboazoum, A. (2022). An Overview of the most Common Vehicle Suspension Problems. Brilliance: Research of Artificial Intelligence, 2(3), 120-124. https://doi.org/10.47709/brilliance.v2i3.1655