ac

Design of Point to Point Access Using Dense Wavelength Divison Multiplexing

Authors

  • Jhonatan Andreas Sinaga Universitas Panca Budi, Indonesia

DOI:

10.47709/brilliance.v2i2.1534

Keywords:

Bit Error Rate, Q-factor, point to point

Dimension Badge Record



Abstract

In this research, a point to point access is designed on an optical communication network to see the performance parameters of bit error rate and q-factor. The research was conducted using OptiSystem software version 17, with design specifications such as a wavelength of 1555 nm, a range of 100 km, a number of 40 channels, and a frequency of 100 GHz. In this study, the best BER (Bit Error Rate) value was 10-6. Meanwhile, the Q-factor value is 4.8, which means that the Q-factor value has met the standard if it is seen from the BER value obtained. There are several factors that have a major influence on the design of fiber optic networks, such as power, amplifier specifications and bandwidth values. To minimize the enlargement of the BER (Bit Error Rate) and Q-factor values ??that come out.

Google Scholar Cite Analysis
Abstract viewed = 107 times

References

Adiati, Rima Fitria., 2017. Analisis Parameter Signal to Noise Ratio dan Bit Error Rate dalam Backbone Komunikasi Fiber Optik Segmen Lamongan-Kebalen, PhD Thesis. Institut Teknologi Sepuluh Nopember.

Sarna, Sri, 2018 Analisis Perkembangan Optical Ethernet. Jurnal INSTEK (Informatika Sains dan Teknologi), 2.2:191-200

Nirmakumala, Sekar, 2019, Perencanaan Jaringan Backbone Metro Ethernet kota Semarang Tahun 2028 menggunakan Algoritma Dysart dan Georganas serta Metode Hungarian dan Forecasting Kruithof’s Double Factor. Transient, 2019, 7.4: 949-956.

M. Ficky, Febri, 2017. Analisis, Perancangan, dan Implementasi Jaringan Wireless Point To Point Antara Kampus A Dan Kampus B Universitas Negeri Jakarta. PINTER: Jurnal Pendidikan Teknik Informatika dan Komputer, 1.2: 134-141.

R.A.Aprilian, E.Wahyudi, K.Masykuroh, “Analisis Parameter Bit Error Rate 10 Gbps 0FDM-RoF dengan Sistem Mapping 4-QAM”, Jurnal Listrik Telekomunikasi Elektronika, 18(2), hlm. 52-56, 2021.

Pratama, T. A. (2013). Analisis Performansi OFDM (Orthogonal Frequency Division Multiplexing) Pada Jaringan Radio Over Fiber (ROF), 2021.

Nugraha, N. H., Khair, F., & Zulherman, D. (2019). Analisis Unjuk Kerja Sistem OFDM-RoF 10 Gbps dengan mapping 4-QAM menggunakan Sistem Dithering. Purwokerto : Lembaga Penelitian dan Pengabdian Masyarakat (LPPM).

Basalamah, A. (2018). ANALISIS TEKNOLOGI OFDM PADA RADIO OVER FIBER (ROF). Logitech Teknik Elektro, 1(1), 40-44.

Dianto, T. W., Zulherman, D., & Khair, F. (2018). STUDI PERANCANGAN SISTEM RoF-OFDM POLARISASI TIDAK SEIMBANG MENGGUNAKAN MODULASI QPSK DAN QAM. Prosiding SENIATI, 307-311.

Downloads

ARTICLE Published HISTORY

Submitted Date: 2022-05-30
Accepted Date: 2022-05-30
Published Date: 2022-06-02

How to Cite

Sinaga, J. A. (2022). Design of Point to Point Access Using Dense Wavelength Divison Multiplexing. Brilliance: Research of Artificial Intelligence, 2(2), 38-43. https://doi.org/10.47709/brilliance.v2i2.1534